DS1102CA Digital Storage Oscilloscope 60Mhz
Application
1. Design and Debug
2. Education & Training
3. Manufacturing
4. Service & Repair
Advanced Features
1. The 2 GSa/s maximum real-time sample rate,the 50 GSa/s maximum equivalent time sample rate and up to 300 MHz of bandwidth ensures you capture and observe your entire signal
2. Up to 2000 wfms/s refresh rate
3. Ultra Compact Design with small footprint save your bench space
4. 5.7'64K TFT color LCD, bright and vivid waveform display
5. Memory depth: 10 kpts (Single Channel),
5 kpts (Dual Channels)
6. Versatile trigger modes: Edge, Video, Pulse Width,
Slope, Alternate
7. Adjustable trigger sensitivity: Effectively filter noise fromtrigger signal and avoid false trigger
8. 20 automatic measurements
9. Cursor measurements: Manual, Track and Auto Measuremodes
10. 10 waveforms, 10 setups, BMP and CSV storage
11. Math functions: Add, Subtract, Multiply, FFT, Invert
12. Special digital filter and waveform recorder
13. Built-in hardware frequency counters
14. Dual channels plus external trigger. Bandwidth including60 MHz, 100 MHz, 200 MHz, 300 MHz
15. Standard interface: USB Device, RS-232£»USB Host, to support USB disk and USB printer
16. Standard configuration: Pass/Fail test,the signal out ofthe pass fail function is isolated to prevent unwantedinterference
17. Multi-language user interface, built-in help system
Versatile Trigger Modes
![](http://www.aidetek.com/New_products_info/Photo/Oscilloscopes/rigo/ds1000_002.jpg) |
Adjustable Trigger
SensitivityThe ability to filter noise from the signal avoids false triggers |
![](http://www.aidetek.com/New_products_info/Photo/Oscilloscopes/rigo/ds1000_003.jpg) |
Alternative Trigger
Provides a true dual time base display that was common in analog oscilloscopes |
![](http://www.aidetek.com/New_products_info/Photo/Oscilloscopes/rigo/ds1000_004.jpg) |
Slope Trigger
Triggers on the signals rise time or fall time that is user defined |
![](http://www.aidetek.com/New_products_info/Photo/Oscilloscopes/rigo/ds1000_005.jpg) |
Rise Edge and Fall Edge Trigger
Mainly used to view eye-diagrams formally only available in more advanced DSO's |
Easy to Use Features
|
Waveform Intensity
Adjustable waveform intensity provides a personalized waveform display
|
![](http://www.aidetek.com/New_products_info/Photo/Oscilloscopes/rigo/ds1000_007.jpg) |
Ultrazoom
Survey macroscopically, observe microscopically
|
logic analyzer module
Mixed Signal Oscilloscope (MSO) with 16 channels Logic Analyzer (LA).LA is divided into two groups: D7-D0, D15-D8. Each works separately. |
![](http://www.aidetek.com/New_products_info/Photo/Oscilloscopes/rigo/ds1000_010.jpg) |
|
![](http://www.aidetek.com/New_products_info/Photo/Oscilloscopes/rigo/ds1000_012.jpg) |
|
Logic Analyzer Module |
Pattern Trigger
The trigger condition is a combination of the level of the signal and the edge |
Duration Trigger
A combination of Pattern Trigger and Pulse Width Trigger capabilities make isolation of events |
Performance Characteristics
Model |
DS1102CA |
Bandwidth |
100 MHz |
Memory Depth |
10 kpts (Single Channel), 5 kpts (Dual Channel) |
Channels |
Dual Channels + External Trigger |
Real-time Sample Rate |
2 GSa/s(Single Channel), 1 GSa/s (DUal Channel) |
Equivalent Sample Rate |
50 GSa/s |
Rise Time |
3.5 ns |
Time Base Range |
2 ns/div to 50 s/div |
Input Impedance |
1 MΩ 15 pF |
Time Base Precision |
±50ppm |
X-Y Operation |
Bandwidth |
100 MHz |
Phase Difference |
± 3 |
Trigger Modes |
Edge, Video, Pulse Width, Slope, Alternative |
Trigger Sources |
CH1,CH2,Ext,Ext/5,AC Line |
Common Parameters
Vertical Sensitivity |
2 mV/div to 10 V/div |
Vertical Resolution |
8 bits |
Input Coupling |
DC, AC, Ground |
Maximum Input Voltage |
300 V (DC + AC peak) |
Roll Range |
500 ms/div to 50 s/div |
Automatic Measurements |
Vpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Preshoot, Overshoot, Frequency, Period, Rise Time, Fall time, Positive Width, Negative Width, Positive Duty Cycle, Negative Duty Cycle, Delay1¡ú2, Delay 1¡ú2 |
Cursor Measurements |
Manual, Track and Auto Measure modes |
Math |
Add, Subtract, Multiply, FFT, Invert |
Storage |
Internal:10 Waveforms and Setups |
|
USB:BMP, CSV, Waveforms and Setups |
I/O |
USB Device,USB Host,RS-232,P/F Out (Isolated) |
Display |
TFT (64K, Color LCD), 320 x 234 |
Power |
Worldwide Use, 100 -240 V / 50 VA Max |
Weight |
2.3 kg |
![](http://www.aidetek.com/New_products_info/Photo/Oscilloscopes/rigo/1022-3.JPG)
Click the picture to view large picture
Click here to download the manual:
www.aidetek.com/New_products_info/Datasheet/rigo/DS1000CA_User's_Guide.pdf
Click here to download the software:
www.aidetek.com/New_products_info/Datasheet/rigo/Install_Driver_for_DS1000_Series.rar
Customer Support Phone Number: (408) 329-7985
Customer Support Skype: Aidetech
|