OWON HDS 1022M-N HAND HELD DIGITAL STORAGE OSCILLOSCOPE
Application:
1. Design and Debug
2. Circuit function test
3. Education and technical training
Main Features:
20MHz~60MHz Bandwidth
up to 250MS/s real time sample rate
2 in 1 (Multimeter function support)
Dual Input Channels
Advanced Trigger Functions
Adjustable Trigger sensitivity
USB Storage /Auto measurement
Replaceable Li-ion Battery Back-up
3.8'' TFT panel guarantee to read clearly even under hard light
Oscilloscope Specification
Model Name |
HDS1022M-N |
Bandwidth |
20MHz |
Sample Rate ( Real time ) |
100MS/s |
Rise time |
<=17.5ns |
Display |
3.8 Inch color display with TFT panel (320x240 pixels, 4096 colors) |
Channel |
Dual |
Record length |
Max. 6000 points on each channel |
GND reference |
Oscilloscope and Multimeter independence |
Time base range |
5ns/div~5s/div |
Interval£¨T£©accuracy(full bandwidth) |
Single:±(1 interval time+100ppm x reading+0.6ns) |
Average>16:±(1 interval time +100ppm x reading+0.4ns) |
Vertical Sensitivity |
5mV/div~5V/div (at input) |
DC Gain Accuracy |
±5% |
A/D Converter |
8bits resolution (2CH simultaneously) |
Max. Input Voltage |
400V(PK-PK) CATII |
Trigger Type |
Edge, Video |
Trigger Mode |
Auto, Normal, Single |
Sampling Mode |
Normal, Peak detection, Average |
Waveform Measurement |
V and T between cursors; PK-PK, Average,RMS, Frequency,Cycle. |
Waveform storage |
4 waveforms |
USB storage |
Support |
Automatic Measurement |
PK-PK, Average, RMS, Frequency, Cycle. |
Waveform math |
+,-,x,÷, Inverted |
Digital Multimeter Testing |
Voltage, Current, Resistance, Capacitance, Diode, Continuity |
Multimeter specifications
Full scale reading |
3 3/4 digits (Max.4000-count) |
Input Impedance |
10 MΩ |
Max input Voltage |
AC:400V, DC:400V |
Max input Current |
AC:10A, DC:10A |
General specifications
Interface |
USB,RS232 ports |
Power |
Supply:100V~240V AC,50/60Hz DC input: 8.5VDC, 1500mA Battery: 8 hours |
Dimension |
180mm x 113mm x 40mm |
Weight |
645g |
2 in 1 T&M instrument
OWON HDS-N series instrument combine digital oscilloscope and multi-meter.
High precision Multimeter function (3 3/4 digits)
The HDS-N series handheld digital oscilloscope is equipped with Multimeter functions. It includes voltage, current, resistance, capacitance, diode test, continuity test.High resolution and precision design guaranty the accurate testing result. The user can choose the automatic or manual meas- urement according to different testing conditions
Average Acquisition Mode
This function reduce random noisy in the signal effectively and quite convenient for the engineer to analyze the waveform by. Below figure is the waveform which achieved after averaging which to show how this function reduces the influence from noisy directly.
USB Storage
This function could save on-site abnormal waveforms and data which can¡¯t be analyzed in time, back them to the laboratory for later analysis. It also can save the data into other formats for further development.
Adjustable trigger sensitivity
OWON HDS-N series oscilloscope added Adj-ustable function on the trigger sensitivity, there-fore to distinguish the superimposed signal on
the trigger signal and prevent from error trigger.
Alternate trigger function
OWON HDS-N series added the alternate trigg-er function. You can test two different groups of signal in the same time and help to enhance
work efficiency greatly.
Observation for instantaneous signal
Digital trace mode is a function of analog oscill-oscope recurs to the digital one. The function can show the waveform value which base on the time
It will help the user to find the irregular waveform and analyze the complicated dynamic signal. All of our products have the function to refresh the sig-
nal and therefore, can observe the instantaneous signal. The function is very useful to make adjust-ment for the tested system
Video Trigger
The HDS-N series handheld digital oscilloscope includes NTSC, PAL or SECAM standard video triggers which help to improve the efficiency
obviously.
Click the picture to view large picture
Click here to download the English Manual:
http://WWW.aidetek.com/New_products_info/Datasheet/owon/HDS1022 USER MANUAL.pdf
Customer Support Phone Number: (408) 329-7985
Customer Support Skype: Aidetech