|
Light meter 1330B Lux foot candle 200,000Lux 20,000FC
|
|
|
Quantity in Basket:
None
Code: A1330B
Price: $52.99
Shipping Weight: 1.40 pounds
|
|
1330B foot-candle light meter up to 200.000Lux.
|
New Digital LCD Lux 1330B foot-candle Light METER
The Digital Luminance Meter is a precision instrument used to measure luminance in the field. It is fully cosine corrected for the angular incidence of light. The luminance meter is compact, tough and easy to handle owing to its construction. The light sensitive component used in the meter is a very stable, long life silicon diode.
FEATURES:
Light-measuring levers ranging from 0.1 to 200,000 Lux
l
High accuracy and rapid response.
l
Data-Hold function for holding measuring values.
l
Unit and sign display for easy reading.
l
Automatic zeroing.
l
Meter corrected for Luminous Efficiency function.
l
Correction factor need not be manually calculated for nonstandard light sources.
l
Short rise and fall times.
SPECIFICATIONS:
l
DISPLAY: 3-1/2 digits LCD.
l
Measuring Range: 200, 2,000, 20,000 and 200,000Lux
(20,000Lux range reading ),
200,000Lux range reading
100)
20, 200, 2,000, 20,000FC
(20,000FC range reading
10)
*1FC+10.76Lux
l
Over range display: Highest digit of "1" is displayed.
l
Accuracy: 3%rdg
?0.5%f.s(5%rdg10dgt as>20,000Lux/2,000FC range).
(Calibrated to standard incandescent lamp at color temperature 2856K)
l
Repeatability:
2%
l
Temperature Characteristic:
0.1%/℃.
l
Measuring
Rate: Approximately 2.0time/sec.
l
Photo detector: One silicon photo diode with filter.
l
Operating Temperature and Humidity:
0℃to 40℃(32℉ to 104℉) 0 to 80% RH.
l
Storage Temperature and Humidity:
-10℃to 60℃(14℉ to 104
℉)0 to 80% RH.
l
Power Source: One 9Volt Battery, NEDA 1604 or JLS 006P or IEC6F22.
l
Battery life (typical): 200hours (Alkaline Battery).
l
Photo Detector Lead Length: 150cm (approx).
l
Photo Detector Dimensions: 100mm(H)
/ 60mm(w)/200mm(D).
l
Dimensions: 149mm(H)
/71mm(w)
/ 41mm(D).
l
Weight: 250g (5.8oz).
l
Accessories: Carry case, instruction manual, battery.
1.
LCD Display: 3-1/2 Digits with a maximum reading of 1999.
2.
Power Switch: The power switch key turns the luminance meter ON or OFF.
3.
Data-Hold Switch: pressing the HOLD key selects HOLD mode. When HOLD mode is selected, the luminance meter stops all further measurements. Pressing the HOLD key again cancels HOLD mode, causing the luminance meter to resume taking measurements.
4.
Data-Peak Switch: Pressing the PEAK key again to clear the peak recording mode.
5.
Lux/FC Unit Switch: pressing the Lux/FC key to choose Lux or FC unit.
6.
Range Switch: Pressing the range key changes 200Luc/20FC, 2,000Lux/200FC, 20,000Lux/2,000FC, 200,000Lu
Click here to download the manual from our estore www.AideTek.com
http://www.aidetek.com/New_products_info/Datasheet/Aidetek/LX1330B_manual.pdf
|